Maintenance; Cleaning - Samsung NX60 87 Series User Manual

Gas Oven

Maintenance

Function "Alexa"
Oven Timer • Set oven[Device name] to 3
(Cook Time) hours[Time].
• Add 10 minutes/hours[Time]
to the oven[Device name].
NOTE
On/Off spec of smart control is same as guided in SmartThings app.
38 English
"Ok Google"
• Set oven[Device name] to 3
hours[Time].
• Add 10 minutes/hours[Time]
to the oven[Device name].
Maintenance

Cleaning

CAUTION
Wear the glove during cleaning.
Control panel
First, lock the control panel and the door to prevent accidental operations and/or
product tipping.
1. Tap , and select Lock using the dial knob to lock both the control panel and
the door.
2. Clean the control panel using a soft cloth dampened with plain water, warm
soapy water, or glass cleaner. Do not spray cleansers directly onto the control
panel.
3. When done, touch , and select Lock using the dial knob to unlock both the
control panel and the door.
WARNING
• Make sure the control panel turns off and all surfaces of the range are cool
before cleaning. Otherwise, you can get burned.
• If the range has been moved away from the wall, make sure the Anti-Tip device
is reinstalled properly when the range has been put into place again. Otherwise,
the range may tip over, causing physical injuries.
• Do not use steel-wool or abrasive cleansers of any kind. These can scratch or
damage the surface.
Stainless steel surface
1. Remove any spills, spots, and grease stains using a soft, wet cloth.
2. Apply an approved stainless steel cleanser to a cloth or paper towel.
3. Clean one small area at a time, rubbing with the grain of the stainless steel if
applicable.
4. When done, dry the surface using a soft, dry cloth.
5. Repeat steps 2 through 4 as many times as necessary.