Connecting The Lcd To Your Pc; If You Have Dvi Connection On Your Video Card - Sceptre X24WG-Naga User Manual

Connecting the LCD to Your PC

If You Have DVI Connection on Your Video Card...

1. Make sure the power of X24 LCD MONITOR is turned off.
2. Obtain a DVI cable and connect to the DVI connection on your PC. Connect the other
end of the cable to your X24 LCD MONITOR.
3. Turn on the power of both the X24 LCD MONITOR and the PC.
Please Note :
•
Some video cards may have their DVI connection turned off by default. If you do
not get video, please consult your video card's technical support.
•
The PC's clearest picture is produced under 1920x1200 at 60Hz.
•
Since this monitor does not feature audio, you need to have your own
speaker setup for audio.
SCEPTRE X24 Page21