Table of Contents
Advertisement
Quick Links
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
This device may not cause harmful interference
This device must accept any interference received, including
interference that my cause undesired operation.
Please Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment
and the receiver.
•
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Caution: To comply with the limits for an FCC Class B computing
device, always use the signal cord and power cord supplied with
this unit.
The Federal communications Commission warns that changes or
modifications to the unit not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
SCEPTRE X22
Page1
Advertisement
Table of Contents
Related Manuals for Sceptre X22
Summary of Contents for Sceptre X22
-
Page 1: Fcc Compliance Statement
The Federal communications Commission warns that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. SCEPTRE X22 Page1... - Page 2 Communications. “Le présent appareil numérique n’èmet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la class B prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada." SCEPTRE X22 Page2...
-
Page 3: Important Information
Important Information SCEPTRE X22 Page3... -
Page 4: Important Information
SCEPTRE X22 Page4... -
Page 5: Tips And Safety Precautions
Do not use abrasive cleaners. covered. Do not place the X22 LCD • Always use the accessories MONITOR in a bookcase or recommended by the manufacturer cabinet unless proper ventilation is to insure compatibility. - Page 6 For more information, contact your the power cord and contact your dealer. dealer immediately. Do not try to • The X22 LCD MONITOR is repair the product yourself. • equipped with a three-pronged Avoid using dropped or damaged grounded plug, a plug with a third appliances.
-
Page 7: Table Of Contents
Supported PC Resolution................34 Supported Video Resolution................35 Troubleshooting..................... 35 How do I clean the LCD? ................38 Specification ....................39 Call Us If You Need Help!................41 LIMITED PRODUCT WARRANTY ..............42 Disclaimer & Copyright Information............... 44 SCEPTRE X22 Page7... - Page 8 For all other inquiries, please call 1800-788-2878 and select option 4 or email our customer service group at cs@sceptre.com. We recommend you register your SCEPTRE X22 LCD monitor with the enclosed registration card and mail it in. For peace of mind and to protect your investment beyond the standard warranty, SCEPTRE offers a two year extended warranty service for your LCD monitor.
-
Page 9: Opening The Package
Opening the Package The SCEPTRE X22 is packaged in a carton together with standard accessories. The weight of the LCD display is approximately 15.2 lbs. Since the LCD panel can be easily scratched or broken, please handle the product gently. Never place the unit on a surface with the glass facing downwards unless it is on a protective padding. -
Page 10: Installing The Base
Installing the Base 1. Please place the base on a flat surface (i.e. table). 2. Hold the monitor directly 90 degrees above the base. 3. Connect the monitor to the base by inserting the monitor into the base. SCEPTRE X22 Page10... -
Page 11: Quick Start
Click on OK on all windows to exit. On the monitor, press the M button twice in succession to AUTO ADJUST. Wait until the monitor finishes calibrating. Reboot your computer and your monitor is ready for use. SCEPTRE X22 Page11... -
Page 12: Mounting Preparations
Mounting Preparations 1. Place the monitor on a flat surface with cloth so the bezel does not get scratched. 2. Please remove the label sticker that covers the screws you need to remove. SCEPTRE X22 Page12... - Page 13 3. Unscrew the 4 screws that lock the arm to the monitor. 4. Once the 4 screws are removed, the stand will come off and the monitor will be ready for mounting. SCEPTRE X22 Page13...
-
Page 14: Identifying Front And Rear Panel
If the light is blinking blue, the monitor is turned on but not receiving a signal from the computer. NATIVE RESOLUTION : This monitor’s clearest picture is produced under its native resolution. The native resolution of the monitor is 1680 x 1050 at 60 Hz refresh rate. SCEPTRE X22 Page14... -
Page 15: Side View Control Buttons
If you entered the function this button acts as the decrease adjustment button. SOURCE – This button allows you choose the source of the monitor between VGA and DVI. SCEPTRE X22 Page15... -
Page 16: Side View Tilt Angle
Side View Tilt Angle The LCD Monitor’s angle settings range from 0° to 12°. SCEPTRE X22 Page16... -
Page 17: Rear View
Rear View Mounting Specification : 100mm x 100mm using screw size M4. Length of screw should not exceed 10mm. SCEPTRE X22 Page17... -
Page 18: Rear View Connections
VGA – VGA stands for Video Graphics Array. This connection is for computers to send video signals to the monitor by an analog signal. This method of connection is the most commonly used connection. This port does not support video input. SCEPTRE X22 Page18... -
Page 19: Understanding Your Cables & Connections
Understanding Your Cables & Connections Cable Corresponding Name Cable Picture Connection Picture (digital video) (optional) (analog video) Power Cord Conversion Conversion Cable Picture Cable Name HDMI to DVI (optional accessory) SCEPTRE X22 Page19... -
Page 20: Connecting The Lcd To Your Pc
Obtain a DVI cable and connect to the DVI connection on your PC. Connect the other end of the cable to your X22 LCD MONITOR. Turn on the power of both the X22 LCD MONITOR and the PC. Please Note : •... -
Page 21: If You Have Vga Connection On Your Video Card
Obtain the VGA cable and connect to the VGA connection on your PC. Connect the other end of the cable to your X22 LCD MONITOR. Turn on the power of both the X22 LCD MONITOR and the PC. -
Page 22: Connecting The Lcd To Your Video Device
If you have HDMI connection on your DVD player, purchase a HDMI to DVI video conversion cable and connect the HDMI end to the DVD player. Connect the DVI end to the X22 LCD monitor. Make sure to match the shapes on both connections. -
Page 23: If You Have Hdmi Connection On Your Hd Box
If You Have HDMI Connection on Your HD Box… Make sure the power of X22 LCD MONITOR is turned off. If you have HDMI connection on your HD set-top box, purchase a HDMI to DVI video conversion cable and connect the HDMI end to the HD set-top box. -
Page 24: If You Have Hdmi Connection On Playstation® 3
If You Have HDMI Connection on PlayStation® 3… Make sure the power of X22 LCD MONITOR is turned off. If you have HDMI connection on your PlayStation® 3, purchase a HDMI to DVI video conversion cable and connect the HDMI end to your PlayStation® 3 and connect the DVI end to the X22 LCD monitor. -
Page 25: If You Have Vga Connection On Xbox 360
If You Have VGA Connection on Xbox 360™… Make sure the power of X22 LCD MONITOR is turned off. If you have VGA connection on your Xbox 360™, purchase an Xbox 360™ VGA video cable and connect the proprietary single head to your Xbox 360™. Connect the VGA end to the X22 LCD monitor. -
Page 26: On Screen Display (Osd) Menu
You can use this function by pressing MENU, then press (▲/+) or (▼/–) to select Auto Adjust. Once Auto Adjust is highlighted, press MENU again to use the function. Please Note : • This function is only available under VGA. SCEPTRE X22 Page26... -
Page 27: Luminance
CONTRAST adjusts the white levels in a picture. If the value is adjusted too high, the picture will not have any details in bright parts of the picture. If set too low, the picture will looked washed out. SCEPTRE X22 Page27... -
Page 28: Geometry
FORMAT – This option adjusts the compatibility of the LCD to a specific resolution under VGA. When using VGA connection, you need to use this option for changing the resolutions below then use AUTO ADJUST after changing the format option. SCEPTRE X22 Page28... - Page 29 Make sure you are in the native resolution of the monitor first before making screen setting adjustments. • This LCD’s native resolution is 1680x1050 at 60 • SCREEN SETTING adjustments are only available under VGA. SCEPTRE X22 Page29...
-
Page 30: Color
RED, GREEN, and BLUE color. AUTO COLOR – This option adjusts the overall balance of white colors in a picture automatically. i. To use this option with hotkeys, press both (▲/+) and MENU together and SCEPTRE X22 Page30... -
Page 31: Osd
H-POSITION – This option moves the OSD menu left or right. V-POSITION – This option moves the OSD menu up or down. OSD TIME – This option change the time which the OSD will remain on screen while idle. SCEPTRE X22 Page31... -
Page 32: Language
Press the (▲/+) or (▼/–) buttons to select the option you want to recall. Press MENU to enter the option and with the (▲/+) or (▼/–) buttons select Yes to recall. COLOR RECALL – recalls all settings of COLOR function. RECALL ALL – recalls all settings besides COLOR function. SCEPTRE X22 Page32... -
Page 33: Miscellaneous
You can switch sources easily by using the SOUCE button on the side of the monitor. EXIT This function exits the OSD menu. Select the EXIT function with the (▲/+) or (▼/–) buttons and press MENU to exit. SCEPTRE X22 Page33... -
Page 34: Supported Pc Resolution
VESA 1680x1050 146.25 59.954 65.29 VESA 1920x1080 67.158 *Once a mode is optimized, there is no need to make any further adjustment as long as the VGA card remains unchanged. **Specifications are subject to change without notice. SCEPTRE X22 Page34... -
Page 35: Supported Video Resolution
60Hz via your video card’s display settings RANGE” menu. After the setting of 60Hz has been change you can then use the LCD on the computer. To change the setting go to display settings by right clicking on your desktop SCEPTRE X22 Page35... - Page 36 Click on OK 2-3 times to finalize your change. If you do NOT have a CRT monitor or it’s already broken, please make sure both the X22 monitor and your computer is turned off. Turn on the LCD and the computer.
- Page 37 Sometimes the colors are not correct because your THE COLORS ARE VGA or DVI cable is loose or corrupt. Please try NOT CORRECT reconnecting your cable or swap out your current cable to see if the problem persists. SCEPTRE X22 Page37...
-
Page 38: How Do I Clean The Lcd
When the screen is dirty to the point where you cannot simply dry wipe it, please lightly dampen the wiping material with clean water and wipe again. Wipe the display with a dry micro-fiber cloth or 100% cotton cloth afterwards. SCEPTRE X22 Page38... -
Page 39: Specification
11.46 lbs (5.2 Kgs) 100V to 240VAC @ 50/60 Hz Max, Power input Features 480i @ 60 Hz 480p @ 60 Hz VIDEO DVI (HDCP) 720p @ 60 Hz 1080i @ 60 Hz 1080p @ 60 Hz *Through DVI only. SCEPTRE X22 Page39... - Page 40 1280 * 960 @ 60 Hz 1280 * 1024 @ 60, 70 ,75 Hz 1360 * 768 @ 60 Hz 1680 * 1050 @ 60 Hz 1920 * 1080P @ 60 Hz *Specifications are subject to change without notice. SCEPTRE X22 Page40...
-
Page 41: Call Us If You Need Help
For technical help, contact our Sceptre Technical Support Group via email or phone. Please have your Sceptre p/n number, serial number, and date of purchase available before you call. -
Page 42: Limited Product Warranty
Service During the one (1) year warranty period, SCEPTRE will, at its option and sole discretion, repair or replace defective parts, including replacement of the entire Panel. The Customer will be required to ship the unit to the Service Center indicated at the time Customer Support is contacted to make the necessary repairs, you are responsible for all transportation charges to the service facility. - Page 43 SCEPTRE retains the right to assess all warranty claims and to determine if damages are covered by the warranty. In case of a claim that is not covered by...
-
Page 44: Disclaimer & Copyright Information
PlayStation® 3 is a registered trademark or trademark of Sony Computer Entertainment Inc. in the United States and other countries. Sceptre, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.