Table of Contents
Advertisement
Troubleshooting
This section will try to anticipate potential problems that you may encounter in the
day-to-day use of your monitor. Included in this section is information which
should help solve these problems for you. If after trying the suggested solutions,
your monitor's symptom remains the same, contact your authorized service center.
Symptoms
The monitor is switched on, but
the power LED is not lit.
The LED light is on but there is no
display on the monitor's
screen.
The display image is either
dangling or unstable.
Solution
Check to make sure that the power cord is properly
connected. If the monitor is plugged into a powered
extension cord or a surge protector, make sure that
extension cord or the surge protector is turned on
Make sure that the computer's switch is in the "On"
position.
Make sure that the video cable's D-shaped connector is
properly connected to the video adapter port on the
back of the PC.
Check to make sure that the brightness and contrast
control are not turned to their dimmest position.
Make sure that the video cable's D-shaped connector is
properly connected to the video adapter port on the
back of the PC.
— 17 —
A
A
PPENDIX
Advertisement
Table of Contents
