Control to close the OSD window.
Degauss
Scroll to the Degauss icon.
Contrast Control to degauss the CRT. If
you do not wish to degauss the CRT,
push the Brightness Control to close the
OSD window.
D-SUB/BNC SW
Input signal port selection between
D-Sub and BNC connector.
Self-Test Screen
When the monitor is powered On, but there is no video signal, the following self-
test screen will appear.
This screen indicates the monitor itself is OK. If this screen appears, it is possible
that the monitor's VGA cable is not connected properly to your computer's VGA
port
or the computer has
problem. Check the connection
Turn the
and the computer.
— 13 —
Chapter 2 —