Sharp 4T-C75FV1U Manual page 4

Attaching the stand (Continued)
How to remove the stand
Remove the stand by following the steps in "Attaching the
stand" in reverse order.
•
Follow the steps below to remove the stand bar from
the base of stand.
1) Remove the screws.
CAUTION
•
In order to prevent scratches on the floor, etc., when
removing the screws, please put a blanket or etc. on it.
•
Do not remove or loosen other screws.
2) Remove the stand bar from the base of stand.
•
Use a stick-shaped object to push the protrusion
through the hole in the stand bar and pull the stand
bar upward.
Comment retirer le support
Retirez le support en suivant les étapes de
"Fixation du support" dans l'ordre inverse.
Suivez les étapes ci-dessous pour retirer la barre
du support de la base du support.
1) Retirer les vis.
FR
ATTENTION
•
Afin d'éviter les rayures sur le sol, etc., lors
du retrait des vis, veuillez mettre une
couverture ou etc. dessus.
•
Ne pas retirer ou desserrer les autres vis.
2) Retirer la barre du support de la base du support.
•
Utilisez un objet en forme de bâton pour pousser l
a saillie à travers le trou de la barre du support
et tirez la barre du support vers le haut.
Cómo quitar el soporte
Siga los pasos en el "soporte de conexión" para
quitar el soporte en el orden inverso.
Siga los siguientes pasos para quitar la barra de
soporte de la base de soporte.
ES
1) Quite los tornillos.
CUIDADO
•
Para evitar arañazos en el suelo, etc., al quitar
los tornillos, cubra con una manta, etc.
•
No retire ni suelte otros tornillos.
2) Retire la barra de soporte de la base del soporte.
•
Empuje la protuberancia a través del agujero en
la barra de soporte con un objeto en forma de
barra y luego tire de la barra de soporte hacia
arriba.
ENGLISH
IMPORTANT INFORMATION
IMPORTANT:
To aid reporting in case of loss or theft, please record the
TV's model and serial numbers in the space provided.
The numbers are located at the rear and left side of the Monitor.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
WARNING: FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user's authority
to operate this equipment.
CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to
connect the unit to other equipment. To prevent electromagnetic interference with electric
appliances such as radios and televisions, use shielded cables and connectors
for connections.
- 7 - 8
EN EN
Model No.:
Serial No.:
The lightning flash with arrow-head
symbol, within an equilateral
triangle, is intended to alert the
user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.
The exclamation point within a
triangle is intended to alert the
user to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
product.