Husqvarna AUTOMOWER 315 Operator's Manual page 17

®
4.4.2 Automower Connect@Home
®
Included in Automower 310/315/315X/
420/430X/440/450X.
®
Automower Connect@Home uses a short-
®
range Bluetooth wireless technology. This
means that you can communicate between the
smartphone and the product as long as you are
within communication range. An icon for
Bluetooth communication will appear in the
product display when connection with your
smartphone has been established.
®
Note: Automower Connect@Home has similar
but not as extensive functionality as Automower
Connect, and uses the same app.
4.4.3 Getting started
Download the Automower
applicable for Automower
from AppStore or GooglePlay. Once you have
downloaded the app, you can specify an e-mail
address and a password to create an account.
You will receive a validation e-mail to the e-mail
address you specified. Follow the instructions in
the e-mail within 24 hours to validate your
account. If not validated within 24 hours, you will
have to create your account again. When the
account has been created in the app you can pair
the product and your smartphone.
4.4.4 Pair with Automower
Accessories > Automower
Select the function
Connect > Pairing > New pairing . When the app
prompts you to do so, enter the 6-digit code
shown on the product display. Also enter your
chosen name of the product into the app.
®
Automower Connect is always connected to
your product as long as the smartphone have
contact with the mobile network and the product
is charged and the main switch is set to
4.4.5 Pair with Automower
Connect@Home
®
Activate Bluetooth wireless communication on
your smartphone. Select the function
Connect@Home > New pairing and follow the
>
instructions in the app. After pairing your product
and smartphone they will automatically connect
each time you get into range. If you want to
connect to the product without having an account
you can still use Automower
1194 - 001 - 23.05.2019
®
®
Connect app (also
®
Connect@Home)
®
Connect
1 .
®
Accessories
®
Connect@Home
®
by selecting Automower
screen in the app.
4.5 Adjusting the cutting height
If the grass is long, let the product start mowing
at the MAX cutting height. Once the grass is
shorter, you can gradually lower the cutting
height.
CAUTION: During the first week after a
new installation, the cutting height
must be set to MAX to avoid damaging
the loop wire. After this, the cutting
height can be lowered one step every
week until the desired cutting height
has been reached.
®
4.5.1 Automower 105
The cutting height can be varied from MIN (2 cm /
0.8") to MAX (5 cm / 2.0"). To adjust the cutting
height:
1. Press the STOP button to stop the product.
Then open the hatch.
2. Turn the height adjustment knob to the
required position. The selected position is
indicated by the orange column on the
height adjustment indicator.
®
4.5.2 Automower 310/315/315X
The cutting height can be varied from MIN (2 cm /
0.8") to MAX (6 cm / 2.4") in 9 steps.
1. Press the STOP button to stop the product
and open the cutting height adjustment
hatch.
2. Turn the knob to the required position. Turn
clockwise to increase and counter-clockwise
to decrease the cutting height. The arrow
aligns with the selected position marked on
the body.
Direct in the start-up
1 2 3 4 5
Operation - 17