Operation - Husqvarna AUTOMOWER 315 Operator's Manual

Historical fault and information
messages can be read in this menu.
For some of the most common fault
messages, there are tips and advice to
help you rectify the fault.
Weather timer
Applicable for Automower
420/430X/440/450X
This function allows the product to
automatically adjust its mowing times
based on how much the lawn grows.
When the weather is good for grass
growth, the product mows more often
and when grass growth is low the
product automatically spends less time
on the lawn.
Installation
This menu function is used to
customize the installation. For many
work areas there is no need to alter the
factory settings, but depending on the
lawn complexity the mowing result can
4.1 Operating mode (Automower
By consecutively pressing the Operation
selection button many times, one can choose
between three different operating modes.
• HOME . Sends the product to the charging
station. It remains here until another
operation mode is selected. When the
battery is fully charged, the product will not
leave the charging station and begin mowing
until the operation selection is altered to
AUTO .
AUTO . The standard, automatic operation
•
mode where the product mows and charges
automatically.
MAN . When mowing secondary areas the
•
MAN setting must be used. If MAN is
selected and the product is started when it is
out on the lawn, it mows until the battery
runs out. It then stops and the 'Needs
1194 - 001 - 23.05.2019
®
315/315X/

4 Operation

®
105)
manual charging' message appears. The
product must then be moved manually to the
charging station and then started manually
after charging. If the product charges in the
MAN mode, it will fully charge, move about
20 cm / 8". out of the charging station and
then stop. This indicates that it is charged
and ready to start mowing.
4.2 Operating mode, START
(Automower
440/450X)
When the START button has been pressed the
following operating modes can be selected:
Main area: The standard operating mode
•
where the product mows and charges
automatically.
be improved by making manual
settings.
Settings
This selection allows you to make
changes to the general product
settings such as date and time. You
ECO mode and
can also turn on/off
Spiral cutting , or save your settings in
Profiles (Automower
different
315/315X/420/430X/440/450X only).
Husqvarna recommends to let
mode be turned on to save energy and
avoid interference with other
equipment.
Accessories
Applicable for Automower
310/315/315X/420/430X/440/450X
This menu handles the settings for the
product accessories, for examples
Automower Connect or Automower
Connect@Home. Contact your local
Husqvarna representative for
information on what accessories are
available for your product.
®
310/315/315X/420/430X/
Operation - 15
®
ECO
®