Introduction; Intended Use; Depicted Components; Package Contents - Parkside 384512 2107 Translation Of The Original Instructions

HAMMER DRILL PBH 1050 C3

Introduction

Congratulations on the purchase of your new
appliance. You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product,
please familiarise yourself with all operating and
safety instructions. Use the product only as
described and for the range of applications speci-
fied. Please also pass these operating instructions
on to any future owner.

Intended use

The hammer drill and power chisel (hereinafter
referred to as applianc e) is suitable for:
▯ Hammer-drilling into brickwork, concrete
and stone
▯ Chiselling into concrete, stone and plaster
▯ Drilling into stone, wood and metal
Any other usage or modification of the appliance
is deemed to be improper and carries a significant
risk of accidents.
The manufacturer accepts no responsibility for
damage(s) attributable to misuse. The appliance
is not intended for commercial use.
■ 38 │ GB │ MT

Depicted components

Screw for the depth stop
Clockwise/anticlockwise switch
ON/OFF switch
Speed preselector wheel
Locking button for ON/OFF switch
LED
Function selector
Release button for function selector switch
Additional handle
Dust protection cap
Tool holder
Locking collar
Depth stop (not prefitted)
Quick-release chuck

Package contents

1 hammer drill
1 additional handle
1 quick-release chuck with SDS plus system tool
fitting (see fig. A)
3 SDS drills (6/8/10 x 150 mm, see fig. B)
1 flat chisel (14 x 250 mm, see fig. B)
1 pointed chisel (14 x 250 mm, see fig. B)
1 depth stop
50 g special grease for lubricating the drill chuck
1 carrying case
1 set of operating instructions
PBH 1050 C3