Makita DUM604 Instruction Manual page 13

2. While pressing the lock lever, turn the undercover
counterclockwise until
with on the lock lever.
Fig.24
3. Remove the undercover.
Fig.25
4.
Loosen two screws with a screwdriver and remove
the shear blades.
Fig.26
► 1 . Screws
NOTE: The shear blades can be removed without
removing the screws.
on the undercover is aligned
1
5. Remove the crank from the shear blades.
Fig.27
► 1 . Crank
NOTE: The crank may remain in the tool.
NOTE: Attach the blade cover and the storage case
to the removed shear blades, and then store the
blades.
Installing hedge trimmer blades
1. Prepare the crank, undercover, and new hedge
trimmer blades.
1
Fig.28
► 1 . Crank 2. Undercover 3. Hedge trimmer blades
2.
Attach the blade cover to the hedge trimmer
blades.
Fig.29
13 ENGLISH
1
2
3