Makita DUM604 Instruction Manual page 11

3. Remove the undercover, shear blades, and crank.
Fig.13
► 1 . Undercover 2. Grass shear blades 3. Crank
Installing the grass shear blades
1. Prepare the crank, undercover, and new grass
shear blades.
1 2
Fig.14
► 1 . Crank 2. Undercover 3. Grass shear blades
2. Remove the blade cover from the old grass shear
blades, and then attach it to the new ones.
Fig.15
3.
the alignment line.
1
2
3
► 1 . Alignment line
4.
of the crank. Attach the crank to the pins with the small
and large rounds facing up.
3
► 1 . Crank
5.
in the base plate and the two protrusions on the blades
are lined up.
11 ENGLISH
Adjust the three pins so that they are lined up on
Fig.16
Apply a small amount of grease to the periphery
Fig.17
Adjust the blades and base plate so that the hole
Fig.18
1
1