Makita DUM604 Instruction Manual page 10

Installing or removing the grass receiver
CAUTION:
When installing or removing the
grass receiver, be sure to attach the blade cover
and be careful not to trap your fingers between
the tool and grass receiver.
Removing the grass receiver
1.
Release the protrusions on the grass receiver
from the grooves on the tool while sliding the grass
receiver toward the front of the tool.
Fig.8
► 1 . Grass receiver
2. Release the hinge of the grass receiver from the tool.
Installing the grass receiver
1.
Hook the hinge of the grass receiver on the groove of the tool.
Fig.9
► 1 . Hinge 2. Grass receiver
2.
Align the protrusions on the grass receiver with the
grooves on the tool by sliding the grass receiver toward the
front of the tool and moving it in the direction of the arrow.
Fig.10
NOTICE:
receiver to the tool forcibly after aligning the pro-
trusions on the grass receiver with the grooves
on the tool.
Installing or removing the shear
blades for grass shear
NOTICE:
such as the crank are worn out, ask Makita
Authorized Service Centers for parts replacement
or repairs.
Removing the shear blades
1.
Remove the grass receiver and place the tool
upside down.
1
Fig.11
2. While pressing the lock lever, turn the undercover
counterclockwise until
with
1
2
Fig.12
10 ENGLISH
Do not attach the hinge of the grass
If the parts other than the shear blades
on the undercover is aligned
on the lock lever.