Troubleshooting Guide - Sanyo DAS201 Owner's Instruction Manual

OPERATING INSTRUCTIONS CONT'D
O. Remote Control Function Operation (cont'd)
KEY(S)
*1 Record OGM1
*2 Record OGM2
*3 Record a Memo
*4 Change CBT Code
6 Change Security Code
*7 Erase Ail Messages
*8 Set to ANSWER ONLY Mode
* Set to ANSWER/RECORD Mode
# End Remote Operation
P. Call Breakthrough Operation (CBT)
– To alert someone to an Urgent Call in the area that the DAS 201 is being
used, follow these steps.
• Call the Answering Machine
• When the DAS 201 answers, press ' * ' to skip the OGM.
• When the OGM stops, enter the CBT Code (factory default '267')
• A two-beep alarm tone sounds on the DAS 201, indicating an Urgent Call.
The user can then simply pick up the phone to end the tone and take
the call.
• The CBT tone ends after 45 seconds. At that time the DAS 201 switches
into ANSWER/RECORD mode, and the you can leave a message.
• In ANSWER ONLY mode, the call is terminated after the 45 seconds.
• If, during your call, you wish to terminate the CBT function, press the
'#' key. If you wish to reactivate CBT, press the '6' key.
REMOTE FUNCTION
12

TROUBLESHOOTING GUIDE

1 Will not operate
2 LED indicator lights are off
3 Cannot turn on Answer key
4 Will not record the Incoming
message
5 Cannot operate remote
control
6 Cannot play the current
tlme
7 Cannot hear message/
Playbacks very loud
8 LED indicates "88" or
number of keys will not
operate
Are the power supply and telephone line
cords plugged into the DAS 201 and the
appropriate power/telephone jacks of your
residence/business?
Is the phone line cord or power supply
properly plugged in?
Have you recorded an outgoing message
(OGM1/OGM2)?
Is your memory full? The DAS 201 will
record up to 20 minutes of messages
Is your security code correct?
Does the clock need to be set or reset?
Have you checked to ensure a proper
volume setting is made?
Please unplug unit and plug it back in. This
resets the DAS 201.