Wi-Fi Settings; Wac Settings; Turning Thermostat Wi-Fi On And Off - Honeywell TH6220WF2 User Manual

Wi-Fi settings

To access the Wi-Fi settings option, follow the
steps below.
Touch Menu on the thermostat home screen.
1
2 Touch the
then touch Select.
3 Touch the
the following options SETUP WIFI, WAC
SETTING and WIFI ON/OFF, and touch Select
on the option you want to edit.
Choose the SETUP WIFI option to get your
thermostat connected to your home's Wi-Fi
network (see instructions on page 10 for
more). For WAC SETTING and WIFI ON/OFF
information, see below.
WAC setting
The Wireless Accessory Configuration (WAC) setting is an iOS-specific setting
that enables Wi-Fi credentials to be securely transferred from an iOS device to the
thermostat. The WAC setting is enabled by default to simplify the Wi-Fi connection
process. If you choose to disable it (not recommended), you'll have to use a different
process to get your thermostat connected to Wi-Fi.

Turning thermostat Wi-Fi on and off

If you want to disconnect your thermostat from
Wi-Fi, follow the steps below.
1 Touch Menu on the thermostat home screen.
2 Touch the
then touch Select.
3 Touch the
ON/OFF, then touch Select.
4 Touch the
or WIFI OFF. Then touch Done to confirm.
or arrows until you see WIFI,
or arrows to cycle through
or arrows until you see WIFI,
or arrows until you see WIFI
or arrows to choose WIFI ON
Back
Back
21
Select Back
Done Cancel
Select
Select