Connecting To A Wi-Fi Network - Honeywell TH6220WF2 User Manual

Connecting to a Wi-Fi network

To configure and control your Lyric T6 Pro Wi-Fi
thermostat remotely, the thermostat needs to be
connected to the Lyric app through your home's
Wi-Fi network. Follow the simple steps below to
get connected.
1 Make sure your smartphone or tablet is
connected to a 2.4 GHz Wi-Fi signal. (Many
Wi-Fi routers broadcast both a 2.4 GHz
signal and a 5.0 GHz signal. If given the
option, choose the 2.4 GHz signal.)
2 At the thermostat, press and hold the indoor
temperature in the center of the screen for
5 seconds until the screen changes.
3 Download the Lyric app from the App Store
or Google Play if you haven't already.
Open the Lyric app. Your thermostat should
appear under Thermostat Found. Tap SET UP
NOW to continue. If your thermostat doesn't
appear, tap INSTALL A DEVICE and follow the
prompts.
Wi-Fi connection status
The thermostat's Wi-Fi connection status is
located in the upper-right corner of the screen.
To troubleshoot Wi-Fi connectivity issues, see
AM
Following Schedule
the FAQs on page 31.
• Wi-Fi is connected
AM
Mode Fan
Following Schedule
Heat Auto
• Wi-Fi is disconnected or Wi-Fi isn't set up
Wake Away Home Sleep
• Wi-Fi is turned off Mode Fan
Heat Auto
Mode Menu Fan
Wake Away Home Sleep
Example of Wi-Fi is connected.
Mode Menu Fan
Example of Wi-Fi is connected.
Wifi is on and
connected AM
Following Schedule
Wifi is on and
Wifi is disconnected
connected
Mode
or wifi is not setup
Heat
Wifi is disconnected
Wake Away Home Sleep
Wifi is off
or wifi is not setup
Mode Menu
Example of Wi-Fi is connected.
Wifi is off
Wifi is on and
connected
Fan
Auto
Wifi is disconnected
or wifi is not setup
Fan
Wifi is off
10
Heat
M36317A
Lyric
AM
Following Schedule
Mode Fan
Heat Auto
Wifi is disconnected
or wifi is not setup
Wake Away Home Sleep
Mode Menu Fan
Example of Wi-Fi is connected.
Wifi is on and
connected
Wifi is off