Profile 545144224 User Manual page 71

545144224
FAN SPEED
TIMER
UP/DOWN
SING MODE
COMPRESSOR
PROTECTION
MONOBLOCK AIR CONDITIONER
In "ventilation" mode, the unit will circulate the air in the
room, not cool it, heat or dehumidify. The fan speed can be
adjusted with the speed knob.
FAN
The "heating" mode defaults to 24°C and warms the air inside
while sending cool air outside. The desired temperature can
be set with the UP/DOWN buttons between 16°C and 30°C.
Fan speed can be adjusted with the speed knob.
HEATING
PTC mode: this additional heating ensures that the appliance
heats up faster and better. As a result, the appliance will have
to go through the "defrost" cycle less often and for a shorter
period of time.
PTC
Press the FAN SPEED button to change the fan speed between
Low, Medium and High. Fan speed cannot be adjusted in
"dehumidify" or sleep mode.
The 24-hour timer can be used to set a delayed start or a set operating
period. The timers cannot be combined. However, different operating
periods can be combined in the app.
OFF TIMER: While the unit is ON: press the timer button; the display will
show "0" 5 times. After the 5th flits; use the UP/DOWN buttons to set the
time duration in 1-hour intervals (min. 1, max. 24 hours). When the timer
expires, the unit automatically turns off.
DELAYED START TIMER: While the unit is ON: press the timer button; the
display will show "0" 5 times. After the 5th flits; use the UP/DOWN buttons
to set the time duration in 1-hour intervals (min. 1, max. 24 hours). After
this interval has elapsed, the unit will automatically turn on in the same
mode it was in when it was last turned off.
Used in cooling and heating modes to set the desired room temperature.
Also used when setting the timer to adjust the time duration.
While the unit is ON: press the SWING key. The blind will now swing up
and down automatically. Press the SING key again and the blind will stay in
its current position. The swing mode can only be set with the remote
control and is on by default.
There is a 3-minute delay in turning on. To protect the life of the
compressor and electronic components, wait at least 5 minutes to turn the
unit back on after turning it off.
EN
15