Table of Contents
Advertisement
Troubleshooting
Problem
Laundry remains
wet at the end of the
programme. (*)
(*) Machine does not switch to spinning step when the laundry is not evenly distributed in the drum
to prevent any damage to the machine and to its surrounding environment. Laundry should be
rearranged and re-spun.
(**) Regular drum cleaning is not applied. Clean the drum regularly. See 6.2
A
CAUTION:
in this section, consult your dealer or the Authorised Service Agent. Never try to
repair a nonfunctional product yourself.
40 / EN
reason
Excessive foam might have occurred and
automatic foam absorption system might have
been activated due to too much detergent
usage.
If you cannot eliminate the problem although you follow the instructions
Solution
• Use recommended amount of detergent.
Washing Machine /User's Manual
Advertisement
Table of Contents
