Timer Recording With The Vcr Plus+ Programming System - Sanyo VHR-H631 Instruction Manual

TIMER RECORDING WITH THE VCR Plus+
PROGRAMMING SYSTEM
From Antenna
or Cable-TV
System
V C R
T V
32
WHAT IS VCR Plus+ PROGRAMMING SYSTEM?
The VCR Plus+ Programming System is a timer programming
system which simplifies timer recording programming. Instead of
entering the date, channel position, and recording timer for the
timer, simply enter the PlusCode
program to record. These PlusCode
be found in most TV magazine and newspaper listings.
To activate the VCR Plus+ programming system, it is necessary
that the preset channel positions match the guide channels which
are assigned to the TV channels (channel mapping). If they do not
match, you have to channel mapping before starting timer record-
ing using the VCR Plus+ system.
ANTENNA/CABLE CONNECTIONS
The Channel Mapping set-up depends on the specific antenna or
cable-TV connection that you have used to hook-up your VCR in
your home. Look left to determine the connection that you have
used and follow the VCR Plus+ Channel Mapping instructions that
apply.
Direct connection from either a home antenna or cable-TV system
that does not require a cable box. Details are on page 7 for a
home antenna and page 8-9 for cable system.
If your VCR is connected like this, follow the VCR Plus+ Channel
Mapping instructions on next page.
® programming number of the
programming number can
®