Table of Contents
Advertisement
MULTIBRAND UNIVERSAL REMOTE CONTROL
POWER
1
2
3
TV/VCR
4
5
6
Ad JUMP
7
8
9
100/ENTER
INPUT
SP/SLP
0
EJECT
REC
PAUSE
REW
FF
PLAY
STOP
ENTER
MENU
CLK/COUNT
SLOW
CH
TRACK
CLEAR
VOL
VOL
VCR
TV
CATV
IMPORTANT NOTE: If
the batteries in the
remote control are
replaced, the codes for
the TV , CATV convert-
er/decoder and DSS
receiver must be reset.
Write your code numbers
below for future refer-
ence.
TV:
CATV:
DSS:
Place the supplied label
on the back of the remote
control.
14
Your remote control is capable of operating your VCR as well as
limited functions of certain televisions, cable (CATV)
converters/decorders and DSS (Digital Satellite System)
receivers. In addition, this remote control is programmed with the
remote control codes of many popular brands, listed on the next
page.
Follow the instructions below to set the appropriate code for your
TV.
SETTING THE REMOTE CONTROL CODE
1
In the chart on the next page, find the code corresponding to
your brand.
2
While holding down the TV or CATV corresponding to your
device, enter the 2-digit code using the number (0-9) (see
the next page).
The remote control is now set to your device.
TV MODE OPERATION
To use the remote control with your TV, press TV. You can use
POWER, 100/ENTER, INPUT, CH/TRACK ( / ), VOL ( + / - )
and number (0-9) buttons to control the TV.
CATV MODE OPERATION
To use the remote control with your cable (CATV)converter/
decoder or DSS (Digital Satellite System) receivers, press
CATV. You can use POWER, 100/ENTER, INPUT, CH/TRACK
( / ) and number (0-9) buttons to control the CATV convert-
er/decoder or DSS receiver.
NOTES
• Only remote-controlled products can be operated using this
remote control. (Refer to the instruction manuals for your TV,
CATV converter/decoder or DSS receiver instruction manual
for more details.)
• There may be some TV, CATV converter/decoder or DSS
receiver models that cannot be operated with this remote con-
trol. If this is the case, use the original remote control supplied
with your equipment.
• Cable companies may charge an extra monthly fee to activate
the
remote
control
converter/decoder. If this is the case, this remote control will
not operate the cable converter/decoder unless such arrange-
ments are made with the cable company.
feature
of
a
rented
CATV
Advertisement
Table of Contents
