Onscreen Display (Osd) - Sanyo VHR-H631 Instruction Manual

ONSCREEN DISPLAY (OSD)

PLAY HI-FI CH 4
SP STEREO
JUL 5 , THU 2:15 PM
POWER
1 2 3
TV/VCR
4 5 6
Ad JUMP
7 8 9
100/ENTER INPUT SP/SLP
0
EJECT REC
PAUSE
REW FF
PLAY
STOP
ENTER
MENU
CLK/COUNT
SLOW
CH
TRACK
CLEAR
VOL VOL
VCR TV CATV
16
PREPARATION
• Turn on the power of both the VCR and TV.
• Be sure the TV is set to the VCR Output Channel (CH 3 or 4).
• If a direct VIDEO/AUDIO connection is made between the
VCR and the TV, set the TV's source selector to VIDEO.
ONSCREEN FUNCTION DISPLAYS
Some of these functions will be displayed every time the VCR is
operated.
FUNCTION DISPLAY
Indicates the function in progress.
HI-FI DISPLAY
Indicates when this unit are playing back tape recorded with HI-FI.
CHANNEL DISPLAY
Indicates the selected channel (or LINE1, LINE2).
STEREO/SAP DISPLAY (MONO is not displayed)
Shows the type of audio signal received by the VCR tuner.
TAPE SPEED DISPLAY
Shows the current tape speed.
CLOCK/COUNT/REMAIN DISPLAY
Shows the current time, the tape counter and remaining time
on the tape.
DATE DISPLAY
Shows the current date. (Month/Day/Day of the week format)
Each press of the ENTER changes the TV screen in the follow-
ing sequence.
STOP CH 4
SP STEREO
JUL 5 , THU 2:15 PM
NOTES
• The function displays can be seen displayed on the TV screen
for 5 seconds.
• The clock (or tape counter, tape remaining) mode will contin-
ue until you press ENTER.
• The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remaining
tape length indicator appears after any tape operation.
2:15 PM
0:35:40
REM 1:58