Table of Contents
Advertisement
CONTROL NAMES AND LOCATIONS (Cont'd)
REAR
AUDIO OUT (L/R) JACKS; Connect this terminal to the audio input terminal on an exter-
nal unit (Audio System, TV/Monitor, Another VCR).
VIDEO OUT JACK; Connect this terminal to the video input terminal on an external unit
(TV/Monitor, Another VCR).
AUDIO IN (L/R) JACKS; Connect the audio output cable from an external unit (ex. Audio
system, TV/Monitor, DVD player, Another VCR) to this terminal.
VIDEO IN JACK; Connect the video output cable from an external unit (ex. Audio system,
TV/Monitor, DVD player, Another VCR) to this terminal.
NOTE
When using this AUDIO/VIDEO IN jacks, select the input channel "LINE1" at the VCR.
Press INPUT to select "LINE1".
WARNING : Do not drop the tying
band of the power cord into the
unit. Doing so might cause a fire
or an electrical shock.
POWER CORD
Connect only to an AC 120V, 60Hz outlet.
INDICATOR PANEL
Cassette indicator
Lights while a cassette is
inserted, and flashes while
ejecting a cassette.
Record indicator
VCR indicator
Use TV/VCR on the remote control
to turn this indicator ON or OFF.
ON: for playback, VCR programming
or watching TV programs through the
VCR tuner
OFF: for watching TV programs
through TV tuner
ANTENNA INPUT CONNECTOR
Connect the VHF/UHF/CATV antenna to this terminal.
VCR OUTPUT CHANNEL SELECT SWITCH
Set this switch to channel 3 or 4.
VHF/UHF/CATV ANTENNA OUTPUT CONNECTOR
Connect this terminal to the VHF or UHF
antenna terminals on the back of a TV.
REC
VCR
Clock/Tape operation indicator
HI — VCR is turned on.
BYE — VCR is turned off.
AUDIO
R
ANT.IN
IN
OUT
L
VHF/UHF
IN
OUT
/CATV
3
4
VIDEO
CH.
TIMER indicator
TIMER
AM
AM indicator
(PM is not displayed)
11
Advertisement
Table of Contents
