Steps
1. Align the slots on the hard-drive with the mounting points on the hard-drive carrier
2. Pry the hard-drive carrier to align the mounting points on the hard-drive carrier with the slots on the hard drive.
3. Insert the hard-drive assembly into the slot on the computer until it clicks into place.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
3.5-inch hard drive
Removing the 3.5-inch hard drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
About this task
The following images indicate the location of the 3.5-inch hard drive and provide a visual representation of the removal
procedure.
52
Removing and installing Customer Replaceable Units (CRUs)
after working inside your
before working inside your
computer.
computer.