Steps
1. Align the front-cover tabs with the slots on the chassis.
2. Rotate the front cover towards the chassis and snap it into place.
Next steps
1. Install the
side
cover.
2. Follow the procedure in
Hard drive
2.5-inch hard drive
Removing the primary 2.5-inch hard drive
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
About this task
The following images indicate the location of the 2.5-inch hard drive and provide a visual representation of the removal
procedure.
44
Removing and installing Customer Replaceable Units (CRUs)
after working inside your
before working inside your
computer.
computer.