Westfire WF35 Installation Manual And Operating Instructions page 28

HOW TO REMOVE A VERMICULITE BRICK SET
28 of 32
WESTFIRE ·WF35
To remove a vermiculite brick set take the following steps.
Ensure the stove is cold before removing brick set.
Remove ashpan and log retainer ,
To remove log retainer lift out individual bars, then lift out metal support
section
Remove lower baffle brick, slide baffle plate forward, then allow rear of
baffle to drop down until baffle is vertical turn baffle and remove from
chamber .
This reveals inner baffle brick above.
28 of 32
Remove inner baffle brick by sliding out inner
baffle support brackets on each side, lower
baffle to vertical position turn and remove
from combustion chamber.
Keep these safe as you need to use them
again.