Westfire WF35 Installation Manual And Operating Instructions page 15

Flue collar direction
Vertical connection
45°connection
Fresh air spigot
supplied with the
stove
Ø 5 mm
15 of 32
180°
Optional fresh air kit
WESTFIRE ·WF35
The flue direction can be changed from the vertical to a
45°connection by lifting out the flue collar and fixing plate and
turning it through 180°.
Take the flue adapter off the stove.
The flue pipe can then be inserted into the collar and sealed
with fire cement. The flue collar will need to be drilled so that
self tapping screws can be used to provide a physical
retention to the flue pipe.
This is now ready for when the stove is fitted into place, where it can be
pulled down into position from within the stove and secured with the 4
.
x M6 nuts
15 of 32