Advertisement
Data Plan/ 数据规划
IP address/IP 地址
Parameter
Description
参数名
参数解释
• Automatic: The system automatically configures the IP address, subnet mask, gateway IP address,
IP address
and DNS.
assignment
自动获取IP地址：系统将自动配置IP地址、子网掩码、网关地址和DNS。
method
• Manual: You need to manually set the IP address, subnet mask, gateway IP address, and DNS.
获取IP方式
使用下面的IP地址：需要用户手动配置IP地址、子网掩码、网关地址和DNS。
• IP addresses starting with 127 are not valid. You must enter an IP address starting with another
value from 1 to 223.
IP address
以127开头的IP地址无效，请输入介于1和223之间的其它数值。
IP地址
• If the camera is passively registered with the platform using the ONVIF or SDK, only the IP address
needs to be configured.
通过ONVIF和SDK被动注册时，仅需要配置IP地址即可。
GB/T 28181
Parameter
Description
参数名
参数解释
Platform IP
IP address of the platform server. This parameter is mandatory.
平台IP
监控平台所在服务器的IP地址。必须设置。
Port number
Port number of the platform server. This patameter is mandatory.
端口号
监控平台所在服务器的端口号。必须设置。
Unique ID that the video security platform allocates to the camera. The value of this parameter must
be the same as the first 20 digits in the device ID (the value of Code on the IVS platform) configured
Device ID
on the video security platform. If they are different, the camera will fail to connect the video security
设备ID
platform.
监控平台分配给前端设备的唯一标识。必须与平台配置的设备ID（在IVS平台中，该参数名为编码）的前20位保
持一致，以免造成对接失败。
User name used to register the camera with the video security platform. The value of this parameter
Login name
is in the login name@domain name format. The login name indicates the device ID. The domain name
登录名
consists of 10 digits.
用于注册到监控平台。格式为：登录名@域名。登录名为设备ID，域名为自定义10位数字。
Password used to register the camera with the video security platform. This password must be the
Password
same as the registration password configured on the video security platform.
密码
设备注册到平台时的注册密码。必须和监控平台中的注册密码保持一致。
Server code
The 20-digit server code complies with the GB/T28181 protocol.
服务器编码
GB/T28181服务器编码。自定义输入20位数字。
Web Operations/Web 操作
Web Client Login/ 登录 Web 客户端
Open Internet Explorer, enter the IPC IP address, and press Enter. The IP address can be set automatically via
1
DHCP, or a static IP address can be used (default: 192.168.0.120).
在Internet Explorer地址栏里输入摄像机的IP地址，IP地址默认通过DHCP自动获取，也可以手动进行设置（默认为
192.168.0.120），按"Enter"键。
NOTE/ 说明
• Supported browsers: Internet Explorer 8-11, Google Chrome 32 and later versions, and Mozilla Firefox
35-51. Google Chrome 45 and later versions require installation of Internet Explorer Tab plug-in.
支持的浏览器：Internet Explorer 8~11、Google Chrome 32及以上版本、Mozilla Firefox 35-51版本。其中
Google Chrome 45及以上版本需安装Internet Explorer Tab插件。
• For security reasons, change the password after logging in to the system as the admin user for the first
time.
首次使用admin用户登录时，请务必修改密码，以免造成安全隐患。
• When using HTTPS to access a camera, you must enable TLS 1.1 or TLS 1.2. Otherwise, the camera web
page cannot be displayed.
使用HTTPS协议访问摄像机时需要启用TLS 1.1或TLS 1.2，否则无法打开摄像机web页面。
• Please open the web browser on your PC as the administrator.
请使用PC的管理员身份打开浏览器。
2
Enter the user name and password. The default user name and password are admin and HuaWei123.
输入用户名和密码。默认用户名为管理员用户"admin"，默认密码为"HuaWei123"。
3
Click Login.
单击"登录"。
Adjusting the Lens/ 调整镜头
After the installation is complete, access the web page to initialize the lens and focus the camera. In the PTZ
1
control area, click
to initialize the lens.
安装完成后，登录Web页面，需要做镜头初始化和聚焦。在预览页面右边栏的PTZ选项中，点击
始化。
After the lens initialization, click
to focus the camera in one push.
2
初始化完成后，点击
按钮完成一键聚焦。
Setting Basic Network Parameters/ 配置基本网络参数
Log in to the web client as the administrator.
1
以管理员用户登录 Web 客户端。
Choose Settings > Network.
2
选择"高级配置 > 网络"。
Set the network parameters as planned, for detail about how to set basic network parameters, see
3
Configuration
Guide.
根据规划的数据配置基本网络参数 , 基本网络参数的具体配置方式请参见《配置指南》。
Setting Platform Connection Parameters/ 配置平台对接参数
Log in to the web client as the administrator.
1
以管理员用户登录 Web 客户端。
Choose Settings > Network > Platform Connection.
2
选择"高级配置 > 网络 > 平台对接参数"。
3
Set the platform connection parameters as planned, for detail about how to set platform connection
parameters, see
Configuration
Guide.
根据规划的数据配置平台对接参数。平台对接参数的具体配置方式请参见《配置指南》。
NOTE/ 说明
The default IPC video coding protocol is H.265. Verify that the connected security platform supports H.265.
Otherwise, see the Configuration Guide to modify the coding protocol used by your IPCs.
摄像机出厂默认编码协议为H.265，请务必确认所对接的监控平台是否支持H.265编码协议，否则请参见《配置指
南》修改摄像机编码协议。
7
按钮完成镜头初
Advertisement
