Helmet Holder - Yamaha TMax XP500 2012 Owner's Manual

59C-9-E1.book 21 ページ ２０１２年６月２６日 火曜日 午前１１時３３分
INSTRUMENT AND CONTROL FUNCTIONS
1
2
3
2
1. Rider backrest
4
2. Bolt
3. Slide the backrest forward or back-
5
ward to the desired position.
4. Install and securely tighten the
6
backrest bolts.
5. Close the seat.
7
8
9
All manuals and user guides at all-guides.com

Helmet holder

3
1
1
1. Shaded projection
2. Helmet holding cable
3. Helmet holder
The helmet holder is located under the
seat. A helmet holding cable is provid-
ed beside the owner's tool kit to secure
a helmet to the helmet holder.
To secure a helmet to the helmet
holder
1. Open the seat. (See page 3-20.)
2. Pass the helmet holding cable
through the buckle on the helmet
strap as shown, and then hook the
cable loop over the helmet holder.
3. Make sure the helmet holding ca-
ble is not touching the shaded pro-
EAU46300
2
To release the helmet from the hel-
met holder
Open the seat, remove the helmet
holding cable from the helmet holder
and the helmet, and then close the
seat.
3-21
jection, and securely close the
seat. WARNING! Never ride with
a helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident.
[EWA10161]