Table of Contents
Advertisement
Available languages
Available languages
Operations
Cleaning
Pyrolytic (applicable models only)
Pyrolytic features high temperature thermal cleaning. It burns off oily leftovers to
facilitate manual cleaning.
Touch the
button on the control panel.
1.
2.
Select Cleaning, and then press the Dial Knob.
3.
Select Pyrolytic, and then press the Dial Knob.
4.
Select the time, and then press the Dial Knob.
5.
Select Next, and then press the Dial Knob.
6.
Follow the instruction on the screen, select Next, and then press the Dial Knob.
Read the message on the screen, select Start, and then press the Dial Knob.
7.
8.
Wait until the oven cools down, and then wipe the door along its edges using
a wet cloth.
CAUTION
•
Do not touch the oven because the oven becomes very hot during the cycle.
•
To avoid accidents, keep children away from the oven.
•
After the cycle is complete, do not power off while the cooling fan is operating
to cool the oven down.
NOTE
•
Once the cycle starts, the oven becomes hot inside. Then, the door will be
locked for safety. When the cycle is complete, and the oven cools down, the
door will be unlocked.
•
Make sure you empty the oven before cleaning. Accessories can be deformed
due to high temperatures inside the oven.
Clean the transparent cover of the camera and the upper LED glass regularly
•
to monitor through the camera. If there are severe stains on these parts,
perform pyrolytic cleaning and then wipe them by using a scouring pad.
•
Do not clean it with a stainless steel spiral pad. It may cause scratches or other
damage to the lens.
34 English
(Camera+Auto door) NV7B6799JAK_U2_DG68-01471B-00.indb 34
(Camera+Auto door) NV7B6799JAK_U2_DG68-01471B-00.indb 34
Steam Clean
This is useful for cleaning light soiling with steam.
This automatic function saves you time by removing the need for regular manual
cleaning.
1.
Touch the
button on the control panel.
2.
Select Cleaning, and then press the Dial Knob.
3.
Select Steam Clean, and then press the Dial Knob.
4.
Select Next, and then press the Dial Knob.
Follow the instruction on the screen, select Next, and then press the Dial Knob.
5.
6.
Select START, and then press the Dial Knob.
WARNING
Do not open the door before the cycle is complete. The water inside the oven is
very hot, and it can cause burns.
NOTE
•
If the oven is heavily soiled with grease, for example, after roasting or grilling,
it is recommended to remove stubborn soil manually using a cleaning agent
before activating Steam cleaning.
•
Leave the oven door ajar when the cycle is complete. This is to allow the
interior enamel surface to dry thoroughly.
•
While the oven is hot inside, auto cleaning is not activated. Wait until the oven
cools down and try again.
•
Do not pour water onto the bottom by force. Do it gently. Otherwise, the water
overflows to the front.
2022-08-22 오후 4:48:16
2022-08-22 오후 4:48:16
Advertisement
Chapters
Table of Contents
