Remote Control Button Description; Cleaning And Maintenance - Midea AC100-20ARB Owner's Manual

Table of Contents

Advertisement

INSTRUCTIONS

Remote control button description

Notice
The remote control should be normally used within 5 meters of the front of the product and 30 degrees
of the deviation angle.
The battery contains many heavy metals, acids and bases, etc., which may threaten human's health;
Waste batteries should be recycled separately.
Open/stop
air swing
Set wind
type
Open/close
cool wind
Note: Both machine body operation "
are buttons of wind type;
Both machine body operation "
are buttons of cool wind;

CLEANING AND MAINTENANCE

Notice
Disconnect the power before cleaning the product. Clean after the product is shut down for two
minutes.
Prevent from using any abrasive tools and solvents that may damage the surface to clean up the
product. Detergent can be used in the cleaning, and then wiped clean with dried cloth in time.
Prevent from washing the machine body with water directly, and wash disassemble parts (wet
curtain parts) with a soft brush and then install them after they are cleaned and dried.
It is not allowed to take the product apart for any modification. It is recommended that this product
should be checked and cleaned regularly in order to extend its service life.
Startup/Standby
"+" indicates accelerating
wind speed
"-" indicates decreasing
wind speed
Set the timed shutdown/
reserved startup
Use manganese or alkaline batteries of type
"AAA". DO not use rechargeable batteries.
" and remote control "
" and remote control "
9
AAA Battery, 1.5 V
Battery
"
"

Advertisement

Table of Contents
loading

Table of Contents