Lithium Battery Warning; Cable Connections; Declaration Of Conformity - SonicWALL 1RK38-0C8 Safety And Regulatory Reference Manual

15. The following statement applies only to rack-installed products that are GS-Marked: This equipment is
not intended for use at workplaces with visual display units, in accordance with §2 of the German
ordinance for workplaces with visual display units.
16. This product is not intended to be installed and used in a home or public area accessible to the
general population. When installed in schools, this equipment must be installed in a secure location
accessible only by trained personnel.
17. When shpped from the factory, this SonicWall product has a single power supply installed. A second
power supply can be ordered and installed for redundant power and added reliability. When the
second power supply is installed, both power cords must be removed to disconnect AC or DC power
from the unit.
18. Never remove or install a power supply with the AC or DC power cord attached to the power supply
being removed or installed.
19. Always disconnect the power cords from the power supplies when installing or removing the power
supply. Never install or remove a power supply with the AC power cord attached.
20. Thumbscrews should be tightened with a tool after both installation and subsequent access to the
rear of the product.
21. When using a Fiber Optic Small-Form Pluggable (SFP) module, ensure it is IEC 60825 certified.

Lithium Battery Warning

The Lithium Battery used in the SonicWall security appliance may not be replaced by the user. Return the
SonicWall security appliance to a SonicWall-authorized service center for replacement with the same or
equivalent type recommended by the manufacturer. If, for any reason, the battery or SonicWall security
appliance must be disposed of, do so following the battery manufacturer's instructions.

Cable Connections

All Ethernet and RS232 (Console) cables are designed for intra-building connection to other equipment. Do not
connect these ports directly to communication wiring or other wiring that exits the building where the
SonicWall appliance is located.

Declaration of Conformity

A "Declaration of Conformity" in accordance with the directives and standards has been made and is on file at
SonicWall International Limited, City Gate Park, Mahon, Cork, Ireland.
CE declarations can be found online at https://support.sonicwall.com.
NOTE: Additional regulatory notifications and information for this product can be found online at
https://support.sonicwall.com.
Sicherheitshinweise für den Einbau und
Betrieb NSa 2650/3650/4650/5650/6650
•
Sicherheitshinweise für den Einbau und Betrieb NSa 2650/3650/4650/5650/6650
•
Hinweis zur Lithiumbatterie
•
Verwarnung Kabelverbindungen
SonicWall NSA 2650/3650/4650/5650/6650
Safety and Regulatory Reference Guide
5