Table of Contents
Advertisement
Your radio displays Out of Range when both LMR and SmartConnect are unavailable.
NOTE:
The SmartConnect feature is only applicable for APX 6000 Enhanced (BN) models and must
be programmed by a qualified radio technician. For more information, contact your system
administrator.
7.18.5
Site Trunking Feature
If the Zone Controller loses communication with any site, that site reverts to site trunking. When this
occurs, you can communicate only with the radios within your trunking site.
The display shows the currently selected zone or channel, and the site trunking message.
7.18.6
Site Search
When searching for a site, your radio is inoperable. In the site search mode, your radio scans for
trunked control channels but has yet to connect to the trunking system or reach other trunking states.
Other trunking states are such as Out of Range and Imbalanced Coverage.
The Searching site indicator alerts you that your radio is attempting to search for a valid trunked
control channel.
7.18.7
Locking and Unlocking a Site
When and where to use: This feature allows your radio to lock onto a specific site and not roam
among wide-area talkgroup sites. This feature should be used with caution, since it inhibits roaming to
another site in a wide-area system.
Procedure:
Use the preprogrammed Site Lock/Unlock button to toggle the lock state between locked and
unlocked.
The radio saves the new site lock state and returns to the Home screen.
7.18.8
Viewing the Current Site
Procedure:
Press the programmed Site Displ/Srch button.
The display shows momentarily the name of the current site and its corresponding received RSSI.
7.18.9
Changing the Current Site
Procedure:
Press and hold down the preprogrammed Site Displ/Srch button.
You hear a tone and the display shows momentary SCANNING.
When the radio finds a new site, it returns to the Home screen.
68012003047-HW
Chapter 7 : Advanced Features
65
Advertisement
Table of Contents
