Siemens SIMATIC Ident RF340R02 System Manual page 48

Planning the RF300 system
4.1 Fundamentals of application planning
Operation in dynamic mode
When working in dynamic mode, the transponder moves past the reader. The transponder
can be used as soon as the intersection (SP) of the transponder enters the circle of the
transmission window. In dynamic mode, the operating distance (S
[Operating distances, see Chapter Field data for transponders, readers and antennas
(Page 51)]
Figure 4-8
48
Operation in dynamic mode
) is of primary importance.
a
System Manual, 07/2017, C79000-G8976-C345-07
SIMATIC RF300