Table of Contents
Advertisement
Quick Links
OWNER'S
MANUAL
MODEL NO.
POL 10550
STARTING SERIAL #:
L103-077001
POL11550
STARTING SERIAL #:
L107-170001
POL11550-CA
STARTING SERIAL #:
L107-170001
IMPORTANT
Read and follow all
Safety Precautions
and Instructions
before operating this
equipment.
Rev. 07-170
1602 CORPORATE DRIVE, P.O. BOX 67, WARRENSBURG, MISSOURI 64093
PHONE 660-747-8183 FAX 660-747-8650
Manufacturing quality lawn care equipment since 1945
ONFM50105
50" FRONT MOUNT/
TRAILMOWER
Assembly
Operation
Service and Adjustment
Repair Parts
Made In The
USA
Advertisement
Table of Contents
Related Manuals for Swisher POL11550
Summary of Contents for Swisher POL11550
- Page 1 OWNER’S MANUAL MODEL NO. POL 10550 STARTING SERIAL #: L103-077001 POL11550 STARTING SERIAL #: L107-170001 POL11550-CA STARTING SERIAL #: 50” FRONT MOUNT/ L107-170001 TRAILMOWER IMPORTANT Read and follow all Safety Precautions and Instructions before operating this equipment. Assembly Operation Service and Adjustment Rev.
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS This Safety Alert Symbol indicates important messages in this manual. When you see this symbol, carefully read the message that follows and be alert to the possibility of personal injury. Read this manual completely. This machine can amputate hands, feet, and throw objects. - Page 3 • Turn off the blades when not mowing. Before leaving the machine, turn off the blades and stop the engine. • Watch for traffic when operating near or crossing roadways. • Do not operate the mower if it has been dropped or damaged in any manner or if the mower vibrates excessively.
-
Page 4: Mower Maintenance
MOWER MAINTENANCE GENERAL RECOMMENDATIONS The warranty on this trailmower does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain unit as instructed in this manual. Some adjustments will need to be made periodically to maintain your unit properly. All adjustments in this manual should be checked at least once each season. -
Page 5: Limited Warranty
1-800-222- 8183. The model number, serial number, date of purchase, and the name of the authorized Swisher dealer from whom you purchased the mower will be needed before any warranty claim can be processed. -
Page 6: Operating Your Mower
OPERATING YOUR MOWER The operation of any mower can produce foreign objects to be thrown into the eyes, resulting in severe eye damage. Always wear certified safety glasses or wide-vision safety goggles over spectacles before starting any cu tting machine and while operating such a machine. - Page 7 STARTING THE ENGINE • See engine manufacturer’s instructions for the type and amount of oil and fuel used. Engine must be level to accurately check and fill oil. Do not overfill. • Park vehicle and mower on a level surface, set the vehicle parking brake, and disengage blades.
-
Page 8: General Troubleshooting
STOP MOWING • Bring vehicle to a full stop. • Disengage clutch lever by moving lever to center position. • Turn key switch to “OFF” position. TRANSPORTING MOWER • Never transport unit with engine running. • If transporting unattached from tow vehicle, remove spark plug wire and place it where contact with the spark plug cannot be made. -
Page 9: Safety And Operational Decals
SAFETY AND OPERATIONAL DECALS Replace decal immediately if damaged. Order by part number from Swisher Mower and Machine Co. Inc. OD99160 – 50” Decal OD33 – Speed Decal OD45 – Warning Decal OD43 – Flying Debris Decal OD10 – BLADE ENGAGE DECAL OD99 –... -
Page 10: Frame Assembly
#18 Detail FRAME ASSEMBLY FIGURE 1 Item No. Description Part # Frame Weldment 5107TK Caster Weldment 5072 Tire & Wheel NO Tread 4.10x3.5-5 5057 Bearing, Flanged 3/4 ID CB58 3/4 Push Nut BLK Plastic NB-687 3/4ID X 1 1/4OD 10 GA. Washer NB195 5/16-18 X 2 1/2 HCC GR5 ZP NB-138... -
Page 11: Deck Assembly
See Detail (Page 12) See Detail (Page 14) Not Pictured TZ2S Spring 2 17 See Detail (Page 14) DECK ASSEMBLY FIGURE 2 Item # Description Part # Item # Description Part # POL 50" DECK WELDMENT 5158TK 5/16-18 X 4 Carriage Bolt NB-101 ENGAGE CABLE MOUNT 5095TK... - Page 12 Item No. Description Part # See Detail Motor Base 5102TK Heat Shield 5094TK Belt Guard 5097TK Anti-Scalp Roller AS-001 3/8-16 X 5 1/2 GR5 ZP NB-575 3/8-16 Nyloc Nut NB-182 1/4 -20 Nut NB-139 1/4-20 X 1 1/4 GR5 ZP NB-102 1/4-20 Lock Nut NB-180...
- Page 13 BELT CONFIGURATION Figure 5 T 39 (39” Belt) 3752 (112” Belt)
- Page 14 BLADE DRIVER SET-UP Figure 6 Outer Blade Center Blade Driver Driver Configuration Configuration Item No. Description Part # Center Shaft 9054 Blade Bearing Bearing Housing 9057TK Pulley Spacer 6065PM Blade Mount Plate 9008 17 1/2" Blade 5059 Blade Driver Assy. Blade Pulley- 5.5"...
- Page 15 Console Assembly Figure 7 Item No. Description Part # Console Weldment 5136TK Clutch Cable Clevis 9023MOD T Handle 4463TK Link for Console 4461TK 5/16-18 X 1 1/2 Torx Pan ZP NB-591 1/4 SAE Washer NB-274 1/4 X 1 1/2 Clevis Pin NB-518 3/32 X 3/4 Cotter Pin NB-597...
- Page 16 All mower parts listed herein may be ordered directly from MANUAL Swisher Mower & Machine Co. Inc. or your nearest Swisher dealer. All engine parts may be ordered from the nearest dealer of the engine supplied with your mower WHEN ORDERING PARTS, PLEASE HAVE THE MODEL NO.