Rear Center Seat Belt - Toyota 4Runner 1996 Manual

Hide thumbs Also See for 4Runner 1996:
Table of Contents

Advertisement

—Rear center seat belt

Sit up straight and well back in the
seat. To fasten your belt, insert the tab
into the buckle.
You will hear a click when the tab locks
into the buckle.
If the belt is not long enough for you, hold
the tab at a right angle to the belt and pull
on the tab.
WWW.MANUALS.WS
!
D After inserting the tab, make sure
the tab and buckle are locked and
that the belt is not twisted.
D Do not insert coins, clips, etc. in
the buckle as this may prevent you
from properly latching the tab and
buckle.
D If the seat belt does not function
normally,
immediately
your Toyota dealer.
WWW.MANUALS.WS
CAUTION
contact
Remove excess length of the belt and
adjust the belt position.
To shorten the belt, pull the free end of the
belt.
Position the lap belt as low as possible on
your hips—not on your waist, then adjust
it to a snug fit.
CAUTION
!
High-positioned and loose-fitting
lap belts could increase the chance
of injury due to sliding under the lap
belt during a collision. Keep the lap
belt as low on your hip bone as pos-
sible.
31

Advertisement

Table of Contents
loading

Table of Contents