Table of Contents
Advertisement
Changing the security code
1. Turn off the audio system.
Turn the ignition key to "ACC".
Simultaneously push and hold in "1", "6",
and "PWR/VOL" until "SEC" appears on
the display.
106
WWW.MANUALS.WS
2. While you are holding in the " " side of
"TUNE" push "1".
The display will read "- - -".
On some models, "_" and "Y" will also
turn on.
WWW.MANUALS.WS
3. Input the existing three-digit code.
You have 10 seconds to enter each digit.
For example, "209":
To set the first digit: Push "1" until the digit
you want appears on the display.
To set the second digit: Push "2" until the
digit you want appears on the display.
To set the third digit: Push "3" until the digit
you want appears on the display.
Advertisement
Table of Contents
