Edit Disc - Sanyo DVR-500 Instruction Manual

Check carefully before proceeding.
Note:
If it is a title menu screen, press [n] twice.

Edit Disc

1. Select "Edit Disc" in "Menu" screen.
(See page E55.)
Play/Edit Disc Play/Edit Titles
b
Record Program Edit Disc
Setup Menu
Press SETUP to exit
2. Press [ENTER].
"Disc Operations" screen appears.
Disc Operations
Format Disc
5
Erase Disc
Finalize Disc
Rename Disc
Protect Disc
Press SETUP to exit
3. Press [p] or [o] to select the item.
Format Disc [DVD+RW]
You can delete all titles and create a blank disc.
Make sure nothing important is left on the disc.
1) Select "Format Disc".
2) Press [ENTER].
A message appears.
Disc Operations
Format Disc
5
Erase Disc
Finalize Disc
Please confirm the Formatting of
this Disc. All titles will be
Rename Disc
permanently deleted.
Protect Disc
Yes
Press SETUP to exit
3) Press [b] to select "Yes".
Note:
If it is not necessary, select "No", and then press [ENTER].
4) Press [ENTER] to start to format.
Please wait until formatting is finished.
• "Disc Operations" screen returns.
Menu
4
No
-E57-
Erase Disc [DVD+RW]
You can erase all titles on the disc.
However, the disc name and format will remain the same.
1) Select "Erase Disc".
2) Press [ENTER].
A message appears.
Disc Operations
Format Disc
4
Erase Disc
5
Finalize Disc
Please confirm the Erasing of this
Disc. All titles will be permanently
Rename Disc
deleted.
Protect Disc
Yes No
Press SETUP to exit
3) Press [b] to select "Yes".
Note:
If it is not necessary, select "No", and then press [ENTER].
4) Press [ENTER] to start to erase.
Please wait until erasing is finished.
• "Disc Operations" screen returns.
Finalize Disc [DVD+R]
After you finalize the disc, you can play the disc on other DVD
players. It can be used as DVD-Video disc. However, this is
not guaranteed.
CAUTION:
After you finalize a DVD+R disc, you cannot edit or
record on the disc. Finish all the editing before you
start to finalize the disc.
1) Select "Finalize Disc".
2) Press [ENTER].
A message appears.
Disc Operations
Format Disc
Erase Disc
4
Finalize Disc
Please confirm the Finalizing of this
5
Disc. You will not be able to
Rename Disc
edit/add titles after finalize.
Protect Disc
Yes No
Press SETUP to exit
3) Press [b] to select "Yes".
Note:
If it is not necessary, select "No", and then press [ENTER].
4) Press [ENTER] to start to finalize.
Please wait until finalizing is finished.
• "Disc Operations" screen returns.
Notes:
• This unit may not be able to finalize the disc if it was
recorded on other DVD recorders or PCs.
• You do not need to finalize the disc again once the disc
has been finalized with this unit.
• Depending on the condition of the disc, recording, or the
unit, discs may not be played even if the discs are finalized.