Sanyo DVR-500 Instruction Manual page 14

Example:
Connecting to an Amplifier with Dolby Digital Decoder or DTS Decoder
Connect the audio cable and/or coaxial digital cable or optical digital cable.
Optical digital cable
Coaxial digital cable
(not supplied)
(not supplied)
or
To Optical DIGITAL
AUDIO OUT jack
OUT
VIDEO
DIGITAL
S-VIDEO AUDIO
AUDIO
DVD recorder
(Partial back panel)
Before connecting, remove the
protective cap from the jack. Replace
the cover when the jack is not in use.
To enjoy Dolby Digital or DTS sound
Set "Digital Out" to "ON" in "Audio Setup" screen. See page E31.
Example:
Connecting to an Amplifier with Dolby Pro Logic Decoder
*Audio cable
(not supplied)
DVD recorder
(Partial back panel)
OUT
VIDEO
COMPONENT VIDEO OUT
DIGITAL
S-VIDEO AUDIO
AUDIO
Note:
Please refer to your amplifier instruction manual.
To digital audio input
or
To Coaxial DIGITAL
AUDIO OUT jack
Front left
speaker
L
Surround left
R
speaker
To AUDIO INPUT jacks
To AUDIO OUT jacks
Front left
speaker
L
R
Surround left
speaker
Amplifier with Dolby Digital Decoder
or DTS Decoder
Center
speaker
*Please consult your local audio/video dealer.
Manufactured under license from Dolby Laboratories.
"Dolby", "Pro Logic" and the double-D symbol are trademarks of
Dolby Laboratories.
"DTS" and "DTS Digital Out" are trademarks of Digital Theater
Systems, Inc.
Amplifier with Dolby Pro Logic Decoder
Center
speaker
*Please consult your local audio/video dealer.
-E13-
Front right
speaker
Subwoofer
Surround right
speaker
Front right
speaker
Subwoofer
Surround right
speaker