Table of Contents
Advertisement
7.
Repeat this removal procedure for each of the remaining
image drum units.
8.
Look into the printer to check whether any sheets of paper
are visible on any part of the belt unit.
9.
Remove any sheets of paper as follows:
>
To remove a sheet with its leading edge at the front of
the belt (1), carefully lift the sheet from the belt and
pull it forwards into the internal drum cavity and
withdraw the sheet.
Do not use any sharp or abrasive objects to separate
sheets from the belt. This may damage the belt
surface.
1
CAUTION!
Troubleshooting > 108
Advertisement
Table of Contents
