Installation; Before First Use - Modena MD 0110 MLWH User Manual Book

Table of Contents

Advertisement

3. Provide adequate space for air circulation between the freezer and
the wall or other objects. Back and side clearance is 10 cm, and top
clearance is 70 cm.
4. Do not put freezer near heat sources such as stove, ovens, boilers,
etc.
5. Do not put freezer under direct sunlight or exposed to rainwater to
avoid electrical current leakage
6. Ensure that the voltage and frequency match the freezer
specification, which are 220 V and 50 Hz.
7. Do not use cord extension or branched outlet since it poses risks of
shortage, overheating and fire.
8. If the unit must be installed in a humid environment, make sure to
install a circuit breaker to avoid shortage.
WARNING!
The power plug must be easily accessed and unplugged after

installation

Before First Use

1.
Before using the freezer for the first time, open the freezer door for
a while to provide good air circulation before use
2. Clean the interior and accessories using lukewarm water and neutral
soap to eliminate bad odor typical from newly manufactured
product. After that, dry before use.
3. Please wait 30 minutes before turning on the freezer. Oil in the
compressor may circulate to the refrigerant system during the
transportation or distribution process
4. When turning the freezer for the first time, cabinet may become
warm and the compressor will operate in a very long time to achieve
ideal temperature. Upon reaching the ideal temperature, the
thermostat will stop the compressor and the freezer will operate
normally
5. Do not put foods into the freezer before the ideal temperature is
reached
7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MD 0110 MLWH and is the answer not in the manual?

Table of Contents