Defrosting - Modena MD 0110 MLWH User Manual Book

Table of Contents

Advertisement

IMPORTANT!
Essential oils and organic solvent may damage plastic components.
For example lemon water, orange water, butyric acid, cleaner that
contains acetic acid.
Do not allow such substances to come in contact with the
appliances.
Do not use abrasive cleaners.
Remove the foods from the freezer and store in a cool and well
covered place.
Clean the interior and accessories using cloth and lukewarm water.
After that, clean with clean water and dry completely.
Dust can accumulate on the condenser and cause performance
drop. Clean the freezer condenser at least once a year using soft
brush or vacuum cleaner.
After everything is dried completely, install the accessories and
freezer to the initial position.

Defrosting

Freezer will become progressively covered with frost and must be
cleaned. Do not use sharp metal objects to scrape the frost because it
can damage the freezer. Use plastic scraper.
If the accumulated frost becomes very thick, complete defrosting should
be performed as follows:
Unplug the unit. Remove the inner drain plug. Open the door and let
it open to accelerate the defrost process. Defrosting usually takes a
few hours.
To collect the defrost water, place a tray beneath the outer drain
hole.
Pull the outer drain dial and rotate 180°. The defrost water will flow
out of the freezer.
When finished, push the outer drain plug back to its place. Reinstall
the inner drain plug. Monitor the water level in the tray to avoid
overflow.
Clean the interior of the freezer and plug the power cord.
Adjust the thermostat knob to the desired position.
11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MD 0110 MLWH and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents