Part 4: Maintenance Cleaning and Maintenance Defrosting LED Lamp Replacement Part 5: Troubleshooting Part 6: Specification This guide book explains everything you need to know about your new product. Please contact our Customer Care should you need further assistance through www.modena.com.
PART 1: SAFETY INFORMATION Read the user manual book carefully! • Keep ventilation openings, in the appliance enclosure or in the built- in structure, clear of obstruction. • Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.
Page 4
• If the refrigerating appliance is left empty for a long period of time; switch it off, defrost, clean, dry, and leave the door open to prevent mould from developing within the appliance • While carrying and positioning the fridge, do not damage the cooler gas circuit.
Environmental Notice The packaging material used is recyclable. We recommend that you separate plastic, paper and cardboard and give them to recycling agents. To help preserve the environment, the refrigerant used in this product is iso-butane (R600a) or propane (R290), which does not affect the ozone layer and has little impact on the greenhouse effect.
PART 2: NAME OF PARTS Door 2. Basket 3. Cabinet 4. Control panel 5. Caster wheels *Above picture is for reference only. Difference between the picture and actual product may occur **Feature and equipments differ by each product PART 3: QUICK START GUIDE Installation Before first use, leave the appliance for 1 hour to stabilize the refrigerant...
3. Provide adequate space for air circulation between the freezer and the wall or other objects. Back and side clearance is 10 cm, and top clearance is 70 cm. 4. Do not put freezer near heat sources such as stove, ovens, boilers, etc.
WARNING! Do not use detergent or abrasive cleaners as it will damage the product finishing Control Panel *Control panel shape and display can be different depending on the product type Control Panel Instructions: Red light indicates POWER. If the power cord is plugged to the power source, the red light will turn on 2.
• The temperature will be affected by: Ambient/room temperature Door open frequency Quantity of food stored inside • To reach the desired temperature, all the above factors must be considered, and a few adjustments may be needed. Freezing Fresh Food Freezer is suitable for freezing fresh food and storing frozen food for a long period of time.
• Lean foods freeze better and can be stored longer than fatty foods. Salt can help preserve the foods. • Consuming ice cubes immediately from the freezer may result in frost burns. • It is recommended to label each individual package with storing date to keep tab of the storage period.
IMPORTANT! Essential oils and organic solvent may damage plastic components. For example lemon water, orange water, butyric acid, cleaner that contains acetic acid. • Do not allow such substances to come in contact with the appliances. • Do not use abrasive cleaners. •...
LED Lamp Replacement If your freezer is equipped with LED lamp, contact Service Center for lamp replacement. LED lamp replacement must be performed by qualified technician. PART 5: TROUBLESHOOTING Check the following before contacting our Service Center in the event of malfunction WARNING! Before troubleshooting, unplug the unit from power source.
Page 13
Problem Possible Cause Recommended Action the freezer • Ensure adequate ventilation • Defrost and clean the freezer • • Appliance is too Thermostat adjusted to Adjust the thermostat with cold maximum position lower setting Dew outside of • • Ambient temperature and Place freezer in a cool and freezer humidity too high...
Need help?
Do you have a question about the MD 0110 MLWH and is the answer not in the manual?
Questions and answers