Installation - Modena SC Series Manual

Install the showcase cooler on even and
sturdy surface. Uneven surface may cause
objects in it to fall.
Do not put the showcase cooler near the heat
source such as stove, hot plates etc. and
avoid placing unit under direct sunlight which
may hamper with the cooling process.
Make sure the voltage is set to 220 volt and
the frequency to 50 Hz. Do not use cord
extension or branched outlet since it poses
risks of shortage, overheating and fire.
Part 2 :

Installation

Provide adequate space for air circulation
between the showcase cooler and the wall to
minimize the operational costs and to maximize
the compressor's age.
Do not expose the showcase cooler to rain
water. Using showcase cooler which has been
exposed to rainwater will result in electricity
leakage.
If the unit must be installed in a humid
environment, make sure to install a circuit
breaker to avoid shortage.
English 13