Advertisement
Features
Max. 576x Zoom combined with 36x Optical and 16x
Digital Zooms
(VCC-9800/9700)
The 36x optical zoom and 16x digital zoom can be combined for
a close-up at a magnification power of 576x. This allows even
distant subjects to be checked in detail, allowing one camera to
monitor a wider area.
Optical zoom
Upward Surveillance Enabled PTZ Operation
In addition to endless 360 /sec panning, the camera's lens sec-
tion enables 185 /sec tilting in the vertical plane for an area of
surveillance expanded by 5 (indoor applications only) compared
to previous models.
Horizontal level
Panning range
360˚
No dead areas with new speed dome cameras
Dead area when at 0 tilt
Image from conventional
camera* at 0 tilt
*Competitor's
3 Types of Auto Mode Settings
Sequence:
Automatic viewing of up to 256 presets (36x
models) or 128 presets (30x models), with
selectable switching order and pause times for
up to 4 different sequences.
Auto pan:
Up to 4 different settings for automatic panning
between two points at selectable speeds.
Tour:
Up to 4 different settings capable of storing up to
1,000 commands of manual pan/tilt/zoom
operation in memory and recreating the same
movement pattern.
Auto return:
Enables automatic return to the mode set in
"auto return" when manual operation is not
performed within a specified amount of time.
36x
Tilting range
–5˚ to 185˚
endless
(With digital auto flip ON)
Upward tilt to 5 past zero for
an expanded area of surveil-
lance with VCC-9800/9700/
9600/9500 cameras
Up to 256 Preset Positions
The user can set up to 256 preset positions with VCC-9800/
9700 cameras and up to 128 preset positions with VCC-
9600/9500 cameras. Preset positions can be set to any
angle—from directly below the camera to 5 higher than the
horizontal position—to allow capture of any image in the area
under surveillance by facing any direction in the adjustable range
of the lens. When manually operated, the lens can be moved at
the speed of 0.1 to 120 /sec for accurate tracking of moving
objects.
Display floor
Store display floor example
All-around Privacy Masking
When there is a house, or even a
window, within the camera frame, it is
possible to mask the area so that it will
not appear on the monitor screen, thus
protecting other people's privacy. Up to
24 rectangular masks of arbitrary size
(rectangular) can be set.
SSP (RS-485) Compatible
By using SSP (SANYO Security Serial Protocol), devices can be
controlled with just one controller via a daisy chain connection of
up to 254 cameras and 100 DVRs. The maximum cable length
(total length of the daisy chain path) is 1200 m (4000 feet)
(approx.).
Main
Dome
Monitor
Camera
Digital Video
Recorder
Spot Monitor
SSP System Controller
Coaxial Control or RS-485
Communication protocol:
Coaxial control: SSP / H-SSP / PELCO-C
RS-485: SSP / H-SSP / PELCO-D
Adjustment via VAC-70 Control Unit
Connection of the VAC-70 control unit allows adjustment of
pan/tilt/zoom and setup directly from an on-screen menu.
Video coaxial cable
Camera
Entrance
Reception
Display floor
Main
Dome
Monitor
Camera
Digital Video
Recorder
Spot Monitor
RS-485
Coaxial
SSP System Controller
(Sold separately)
VAC-70
Monitor
Advertisement
