Lanner electronics AP-545L Manual page 40

Single board computer with vga / lcd for zif socket 7 processor
Table of Contents

Advertisement

AMI BIOS SETUP
3.4 A
DVANCED
When you select the "ADVANCED CMOS SETUP" on the main program, the screen
display will appears as:
Advanced CMOS Setup Screen
0© 1998 American Megatrends, Inc.
1st Boot Device
2nd Boot Device
3rd Boot Device
4th Boot Device
Boot From Card BIOS
Try Other Boot Devices
S.M.A.R.T. for Hard Disks
Quick Boot
BootUp Num-Lock
Floppy Drive Seek
HDD Access Control
PS/2 Mouse Support
System Keyboard
Primary Display
Password Check
Parity Check
Boot To OS/2, DRAM 64MB or Above
Wait For 'F1' If Error
Hit ' DEL ' Message Display
Note : The above page of the Advanced CMOS Setup only shows part of the related
options. To proceed to the next options, please move your cursor downwards.
Advanced Setup options are displayed by choosing the Advanced icon from the
WINBIOS Setup main menu. All Advanced Setup options are described in this section.
Boot Device : 1st ~ 4th Boot Devices are the options that set the sequence of boot
drives (FLOPPY, IDE-0, CDROM, LS-120 or SCSI) that the AMIBIOS attempts to boot
from after AMIBIOS POST completes. To select the devices, please refer to Available
options.
Available Options : Choose your desired devices from the selection here – Disabled,
IDE-0, IDE-1, IDE-2, IDE-3, FLOPPY, LS-120, CDROM and SCSI.
CMOS S
ETUP
AMIBIOS SETUP – ADVANCED CMOS SETUP
AP-545L / 34
All Rights Reserved
FLOPPY
IDE-0
CDROM
SCSI
Yes
Yes
8 Floppy
Enabled
Enabled
On
Disabled
Normal
Enabled
Present
VGA/EGA
Setup
Disabled
No
Enabled
Enabled
Available Options
Disabled
IDE-0
IDE-1
IDE-2
IDE-3
ARMD-FDD
ARMD-HDD
CDROM
SCSI
NETWORK
-¯ : Sel
ESC : Exit
PgUp/PgDn : Modify
F2/F3 : Color
:

Advertisement

Table of Contents
loading

Table of Contents