Garland APACHE KEEPER 40V 395 S Instruction Manual page 37

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 24
cutting elements. Also remove any objects that could
be expelled by the machine or its parts when getting
in contact with these.
Do not allow anybody to enter the workng area.
Ths working perimeter is 15 metres and this is a
dangerous zone.
When moving from one working area to the next, turn
off the engine.
Never let the machine unattended.
Do not use any accessories that are not originals
and that have not been recommended by the
manufacturer. Use of other accessories can cause
accidents and can be dangerous for the end user
and those nearby as well as causing damages to the
machine.
Always follow the security rules that we indicate in the
manual.
7.1. HOW TO HOLD THE MACHINE AND GUIDE IT
WHILST WORKING
Whilst you work, hold the lawnmower
with both hands.
Always be behind the lawnmower
and push it whilst you are behind it.
Do not run whilst working, walk at a constant pace
that allows the machine to cut the grass without too
much effort.
7.2. ADJUSTING THE CUTTING HEIGHT
WARNING! Stop the machine and wait until the
blade stops before proceeding to adjust the height.
Blades need a few moments to stop completely after
you turn off the engine.
To regulate the cutting height adjustment, press the
mower level away from the lawnmower and move it
forward or backward to the desired height.
7.3. CUTTING WITH THE LAWNMOWER
This mower has 3 different cut settings (cutting with
debris collection, with lateral discharge and mulching
cut. Before you begin working, you must configure the
mower to set it one of the three possible ways.
Cutting with debris collection:
In this setting, the mower will cut the grass and send
it to the collector bag. The grass will be cut and
the rest of grass cut within the bag. For the debris
collection setting, place the bag in the back of the
machine and make sure that the lateral outlet cover is
closed and the mulching plug is not installed.
Rear discharge cut:
Setting in which the cut grass will leave the back of
the machine remaining on the lawn. In this case, the
machine must not have the bag installed, the rear
37/116
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apache keeper 40v 395-v23

Table of Contents