Garland APACHE KEEPER 40V 395 S Instruction Manual page 33

6. INSTRUCCIONES PARA LA
PUESTA EN SERVICIO
6.1. LISTA DE MATERIALES
This machine includes the following elements that you
will find inside the box:
• Machine.
• Handlebar
• Coat.
• Mulching plug (placed in the rear outlet)
• Screw, wing nut and washer of the
upper handle (2).
• Screw, wing nut and washer of the
lower handlebar (2).
• Cable retaining clip.
• Stops (2).
• Tool.
• Manual.
Remove carefully all the elements from the box and
make sure that all listed parts are included. Due to
the quality controls done at the factory it is highly
improbable that your machine has any faulty part
or that any elements are missing. If you find any
damaged part or there are any elements missing,
do not use the machine until the problem has been
solved or you have been given the missing parts.
Usage of the machine with defective or missing parts
is dangerous and could result in personal injuries.
6.2. MOUNTING
6.2.1. HANDLEBAR MOUNT
Place the lower handle in the position that best suits
your job (H) or (L) and insert the screws. Then place
the corresponding washers and wing nuts and tighten
them well.
Place the upper handlebar on the lower handlebar and
once you have inserted the screws, place the washers
on the other side and tighten the wing nuts.
33/116
English