Page 1
OWNER’S MANUAL 16” Reel Lawn Mower Copyright All Rights Reserved. Model 1816-16-1 | SKU# 270-1424 WARNING: To reduce the risk of injury, the user must read and understand the owner’s manual before using this product. Thank you for your purchase.
3. Handle Assembly Hardware Bag 4. Instruction Manual Handle Assembly Hardware Bag (D) 6 Washers (C) 6 Wing Bolts (E) 2 “E” Rings (B) 6 M6x35 Handle Bolt PLEASE MAKE SURE YOU HAVE ALL THESE PARTS BEFORE YOU BEGIN ASSEMBLY Model 1816-16-1...
Page 3
If you are having trouble, set the entire reel on its side. Apply pressure downward on the lower handle to position it underneath Figure 2 the short metal posts on the reel. Gently relieve the pressure until the handle is set into place upon the second pin. Model 1816-16-1...
Page 4
Height Adjuster Basic Cutting Height Adjustments (Figure 3) The Yardworks 16” Reel Lawn Mower is equipped with an easy height adjust- ment system on 2 trailing wheels. Adjustment is made by simply pulling out- wards on the height adjustment lever to clear the locking tab and either raising or lowering the trailing wheel.
Page 5
It is recommended that you routinely apply oil or lubricant (i.e. WD-40) to all cutting surfaces. • Reel mower blades generally need to be sharpened once per season. SK-1 and SK-2. Sharpening Kits are compatible with this reel mower. Model 1816-16-1...
The model/ serial number of this tool is found on a plate or label attached to the housing. Please record the serial number in the space provided below. MODEL NUMBER 1816-16-1 ___ SERIAL NUMBER_______________ Always mention the model number when ordering kits/items for this tool.
Page 8
Two (2) year limited warranty on Yardworks Reel Mowers. The Great States Corp. (GSC) warrants to the original owner that this Yardworks product and service part is free from defects in materials and workmanship and agrees to repair or replace any defective product or part for the warranty period as stated above.