4. Loosen all four mounting bracket screws. Remove
the two mounting bracket screws and washers from
the round holes of canopy. Set aside for later use.
Detach mounting bracket from canopy (Fig. 4).
Mounting Bracket
Screw
5. Secure the mounting bracket to the outlet box using
screws washers provided with the outlet box (not
included) (Fig. 5).
Note: It is very important that you use proper hardware
when installing the mounting bracket as it supports
the fan.
Important: If using the angle mount, ensure that the
open end of the mounting bracket is installed facing
the peak of the ceiling.
MOUNTING BRACKET INSTALLATION
Washer
Fig. 4
Fig. 5
6
Mounting
Mounting
Bracket
Bracket
Screws
Washer
Canopy