Sensor Calibration - Lenovo ThinkPad X13 Yoga Gen 1 Hardware Maintenance Manual

• They maintain tight connections.
• They do not easily come loose, even with shock or vibration.
• They are harder to tighten.
Do the following when you service this machine:
• Keep the screw kit in your tool bag. For the part number of the screw kit, go to
partslookup .
• It is recommended to use new screws.
• It is recommended to use each screw only once.
Tighten screws as follows:
• Plastic to plastic
Turn an additional 90 degrees after the screw head touches the surface of the plastic part.
• Logic card to plastic
Turn an additional 180 degrees after the screw head touches the surface of the logic card.
Notes:
• Ensure that you use the correct screw. It is recommended to use new screws for replacements. If you
have a torque screwdriver, tighten all screws firmly to the torque specified in the screw information table
for each step.
• Ensure that torque screwdrivers are calibrated correctly following country specifications.

Sensor calibration

If your system board or sensor board has been replaced, do the following to make sensor calibration:
1. Download the Windows Sensor Calibration Tool from
2. Extract the tool into a local driver, such as D:\WinCalibration.
60
X13 Yoga Gen 1 Hardware Maintenance Manual
https://support.lenovo.com/
https://support.lenovo.com .