1120 Nfc Card And Nfc Cable (For Selected Models) - Lenovo ThinkPad X13 Yoga Gen 1 Hardware Maintenance Manual

When installing:
• Always wear fingerstalls when handling the thermal fan assembly. Do not touch or hold any part of the
thermal fan assembly with bare fingers.
• Before you attach the thermal fan assembly to the computer, apply thermal grease, at an amount of 0.2
grams, on the part marked
application of grease can cause a thermal problem due to imperfect contact with a component.
• Do not touch the thermal grease.
• Do not press, touch, or rotate the fan impeller.
• Do not touch the fan inlet hole.
• Do not twist or pull the cable of the thermal fan assembly.
• Do not apply pressure on the top and base covers of the thermal fan assembly.
• Do not press the heat pipe. Hold both sides of the heat pipe when you take the thermal fan assembly.
• Do not shake or drop the thermal fan assembly.
• Ensure that the fan connector is attached firmly.
• Replace the thermal fan assembly if you observe the following:
– The cover of the thermal fan assembly is deformed or damaged.
– There is abnormal noise during rotation.

1120 NFC card and NFC cable (for selected models)

For access, remove these FRUs in order:
• "1010 ThinkPad Pen Pro" on page 66
• "1020 Nano-SIM-card tray (for selected models)" on page 67
• "1030 Base cover assembly" on page 67
• "1040 Built-in battery" on page 68
Removal steps of the NFC card and NFC cable
76
X13 Yoga Gen 1 Hardware Maintenance Manual
a as shown in the following illustrations. Either too much or too less